This is a Brand New Front Left and Right Cv Shaft Axles with Wheel Hub & Bearing Repair Kit than will fit the following Honda's Years and Models with Automatic Transmission ONLY!!!:

Note.- Will not fit Hybrid Models

HONDA  2006-2011
   CIVIC   2006-2011
     2011 L4-1799cc 1.8L F/I Vin R18A1   
     2011 L4-1799cc 1.8L CNG/FI Vin R18A4   
     2010 L4-1799cc 1.8L F/I Vin R18A1   
     2010 L4-1799cc 1.8L CNG/FI Vin R18A4   
     2009 L4-1799cc 1.8L F/I Vin R18A1   
     2009 L4-1799cc 1.8L CNG/FI Vin R18A4   
     2008 L4-1799cc 1.8L F/I Vin R18A1   
     2008 L4-1799cc 1.8L CNG/FI Vin R18A4 (GX)   
     2007 L4-1799cc 1.8L F/I Vin R18A1   
     2007 L4-1799cc 1.8L CNG/FI Vin R18A4 (GX)   
     2006 L4-1799cc 1.8L F/I Vin R18A1   
     2006 L4-1799cc 1.8L CNG/FI Vin R18A4 (GX)    

Check Vehicle for Compatibility

Kit Includes: 4Pc

1 x Part # NCV36568 - HO-8219 Driver Side Cv Shaft Axle
1 x Part # NCV36569 - HO-8218 Passenger Side Cv Shaft Axle
2 x Part # 63086K Front Hub & Bearing Repair Kit
NOTE: This part must be pressed onto spindle at time of installation, this must be done by a qualified technician or the hubs will fail 

 

IMPORTANT

• Proper axle torquing procedures
• It is imperative that you follow the manufacturer's specifications to insure the axle is installed correctly. Failure to follow the manufacture's procedures can result in failure of your new axle & hub bearing.
• One of the most common mistakes during installation is improper torque of the axle spindle nut. Over torque of the axle spindle nut can cause the bearing and axle to overheat , which will dramatically reduce the life of your new axle & hub bearing assembly.
• While it may appear to be easier to use an impact wrench , it is not recommended. A torque wrench is !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
• Every vehicle has specific torque specifications , and it will be listed after the axle part number.
• New axle failure may also be caused buy broken or worn engine or transmission mounts.